Juniper TX MATRIX PLUS Hardware Manual page 476

TX Matrix Plus Router Hardware Guide
Related
Documentation
442
Strong sources of electromagnetic interference (EMI) can destroy the signal drivers and
receivers in the TX Matrix Plus router and conduct power surges over the lines into the
equipment, resulting in an electrical hazard. It is particularly important to provide a properly
grounded and shielded environment and to use electrical surge-suppression devices.
CAUTION: To comply with intrabuilding lightning/surge requirements,
intrabuilding wiring must be shielded, and the shield for the wiring must be
grounded at both ends.
Compliance Statements for EMC Requirements for M Series, MX Series, and T Series
Routers (Canada) on page 427
TX Matrix Plus Compliance Statements for EMC Requirements (European Community)
on page 427
Compliance Statements for EMC Requirements for M Series, MX Series, and T Series
Routers (Japan) on page 429
Compliance Statements for EMC Requirements for M Series, MX Series, and T Series
Routers (United States) on page 429
Copyright © 2010, Juniper Networks, Inc.