Txp-F13 Sib Slots; Table 3: Txp-F13 Sib Slots - Juniper TX MATRIX PLUS Hardware Manual

TX Matrix Plus Router Hardware Guide
14
These components are located on the TXP-F13 faceplate:
Eight high-speed fiber-optic links connect to two T1600 routers in the routing matrix.
The left four ports are labeled
LCC— LCC0 or LCC2 .The right four ports are labeled
one odd-numbered LCC—
, , and
A CBL B CBL C CBL D
Three ONLINE/OFFLINE
The
ONLINE/OFFLINE
and TXP-T1600 SIB on the even T1600 router online and offline.
The
ONLINE/OFFLINE
and TXP-T1600 SIB on the odd T1600 router online and offline.
The
ONLINE/OFFLINE
and offline.
Three status LEDs, labeled
buttons.
Two port LEDs, labeled LINK
port.
Three LEDs, labeled ,
OK FAIL
the status of the link to the T1600 router.

TXP-F13 SIB Slots

Sixteen horizontal TXP-F13 SIB slots numbered 0 through 15 (top to bottom) are located
in the rear of the TX Matrix Plus router. A TXP-4 configuration contains ten TXP-F13 SIBs,
two for each data switching plane. The remaining slots are unused.

Table 3: TXP-F13 SIB Slots

TXP-F13 SIB Slot TXP-F13 SIB Name
Slot 0 SIB F13 0
Slot 1
SIB F13 1
Slot 2 Unused
Slot 3
SIB F13 3
Slot 4
SIB F13 4
Slot 5 Unused
Slot 6 SIB F13 6
Slot 7 SIB F13 7
and provide connections to one even-numbered
EVEN
or . The four ports on each side are labeled
LCC1 LCC3
.
buttons are located in the middle of the TXP-F13 SIB.
button labled brings the corresponding interface
LCC EVEN
button labled brings the corresponding interface
LCC ODD
button in the center labeled
, and , located below the
ACTIVE OK FAIL
and RxPWR , located to the right of each fiber-optic array
, and are located on the craft interface; they show
ACTIVE
Plane
0
–
1
–
2
ODD and provide connections to
brings the TXP-F13 SIB online
SIB
ONLINE/OFFLINE
Copyright © 2010, Juniper Networks, Inc.
CBL