Figure 98: Inserting The Cleaning Adapter Into The Fiber-Optic Array Port And The Cleaning Tip Into The Keyed Slot Of The Cleaning Adapter - Juniper TX MATRIX PLUS Hardware Manual

TX Matrix Plus Router Hardware Guide
272
WARNING: Do not look directly into a fiber-optic array port or a connector
at the end of a fiber-optic array cable connected to a port. The fiber optics
emit laser light that can damage your eyes.
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect
5.
the strap to one of the ESD points on the chassis.
Remove the dust cap from the fiber-optic array port. Open the dust shutter on the
6.
fiber-optic array port, and insert a cleaning adapter (see Figure 98 on page 272).
Remove the dust cap from the cleaning tool.
7.
Insert the tip of the dry cloth cleaning tool into the cleaning adapter (see Figure 98
8.
on page 272).
Figure 98: Inserting the Cleaning Adapter into the Fiber-Optic Array Port
and the Cleaning Tip into the Keyed Slot of the Cleaning Adapter
Fiber-Optic Array Connector
Cleaning tool adapter
NOTE: The cleaning adapter is keyed to ensure that the cleaning tip can
be inserted in only one way.
Rotate the thumb wheel in the direction indicated on the cleaning tool until the thumb
9.
wheel clicks to indicate a completed cleaning action (see Figure 99 on page 273).
Cleaning tool
Copyright © 2010, Juniper Networks, Inc.