Committing The Configuration - Juniper TX MATRIX PLUS Hardware Manual

TX Matrix Plus Router Hardware Guide

Committing the Configuration

Related
Documentation
178
Display the configuration to verify that it is correct.
1.
[edit]
root@# show
system {
host-name host-name;
domain-name domain-name;
backup-router address;
root-authentication {
authentication-method (password | public-key);
}
name-server {
address;
}
}
interfaces {
em0 {
unit 0 {
family inet {
address address/prefix-length;
}
}
}
}
Commit the configuration to activate it on the router.
2.
[edit]
root@# commit
Optionally, configure additional properties by adding the necessary configuration
3.
statements. Then commit the changes to activate them on the router.
[edit]
root@host# commit
When you have finished configuring the router, exit configuration mode.
4.
[edit]
root@host# exit
root@host>
TX Matrix Plus CLI Overview on page 72
Preparing to Configure the TX Matrix Plus Router on page 175
Configuring Specific LCC Chassis Features for T1600 Routers on page 179
Configuring a T1600 Router to Be Offline on page 179
Configuring the TX Matrix Plus Router to Generate an Alarm if the T1600 Routers in
the Routing Matrix Do Not Come Online on page 180
Copyright © 2010, Juniper Networks, Inc.