Dc Power Electrical Safety Warnings For M Series, Mx Series, And T Series Routers; Dc Power Copper Conductors Warning; Dc Power Disconnection Warning - Juniper TX MATRIX PLUS Hardware Manual

TX Matrix Plus Router Hardware Guide
Related
Documentation

DC Power Electrical Safety Warnings for M Series, MX Series, and T Series Routers

422
Grounding the TX Matrix Plus Router on page 166
Providing Power to a Seven-Input 420-A Power Supply on page 167
TX Matrix Plus General Electrical Safety Guidelines on page 414
General Electrical Safety Warnings for M Series, MX Series, and T Series Routers on
page 417
DC Power Electrical Safety Warnings for M Series, MX Series, and T Series Routers on
page 422
When working with DC-powered equipment, observe the following warnings:
DC Power Copper Conductors Warning on page 422
DC Power Disconnection Warning on page 422
DC Power Wiring Terminations Warning on page 424

DC Power Copper Conductors Warning

WARNING: Use copper conductors only.
Waarschuwing Gebruik alleen koperen geleiders.
Varoitus Käytä vain kuparijohtimia.
Attention Utilisez uniquement des conducteurs en cuivre.
Warnung Verwenden Sie ausschließlich Kupferleiter.
Avvertenza Usate unicamente dei conduttori di rame.
Advarsel Bruk bare kobberledninger.
Aviso Utilize apenas fios condutores de cobre.
¡Atención! Emplee sólo conductores de cobre.
Varning! Använd endast ledare av koppar.

DC Power Disconnection Warning

WARNING: Before performing any procedures on power supplies, ensure that
power is removed from the DC circuit. To ensure that all power is off, locate
the circuit breaker on the panel board that services the DC circuit, switch the
circuit breaker to the
breaker in the
OFF
Waarschuwing Voordat u een van de onderstaande procedures uitvoert,
dient u te controleren of de stroom naar het gelijkstroom circuit uitgeschakeld
OFF position, and tape the switch handle of the circuit
position.
Copyright © 2010, Juniper Networks, Inc.