Juniper TX MATRIX PLUS Hardware Manual page 234

TX Matrix Plus Router Hardware Guide
Related
Documentation
200
To prepare to upgrade and integrate an operational T1600 router:
Verify that you have the required rear fan tray. An upgraded rear fan tray (part number
1.
760-024613) is required to cool the chassis. Part number 760-009870 is not supported
for a T1600 router in a routing matrix.
Verify that you have the required power supplies. An upgraded three-input 240-A
2.
power supply (part number 740-026384) or a four-input 240-A power supply is
required. The three-input 240-A power supply (part number 740-017906) is not
supported for a T1600 router in a routing matrix.
Order the hardware. The hardware upgrade kit includes two LCC-CBs and five
3.
TXP-T1600 SIBs. The Routing Engines must be ordered separately. The rear fan tray
and power supplies, if needed, can also be ordered separately.
See the T1600 Core Router Hardware Guide.
Prepare the installation site for the T1600 router.
4.
See "Overview of Preparing the Site for a TX Matrix Plus Router" on page 103 and the
T1600 Core Router Hardware Guide.
Review all safety guidelines and warnings for both the TX Matrix Plus router and T1600
5.
router.
WARNING: To avoid harm to yourself or the TX Matrix Plus router as you
install and maintain it, you must follow the the safety procedures for
working with Internet routers, as well as the guidelines and warnings for
working with and near electrical equipment. However, providing an
exhaustive set of guidelines for working with electrical equipment is beyond
the scope of this documentation.
See "General Safety Guidelines for M Series, MX Series, and T Series Routers" on
page 391 and "General Safety Warnings for M Series, MX Series, and T Series Routers"
on page 395.
Verify that the the fiber-optic array cables have been connected to the TX Matrix
6.
router.
See "Connecting the Fiber-Optic Array Cables to the TX Matrix Plus Router" on page 181.
NOTE: Additional T1600 routers you integrate must be offline.
Overview of Upgrading an Offline T1600 Router Before Integrating it into a Routing
Matrix on page 223
Overview of Integrating an Offline T1600 Router into a Routing Matrix on page 231
Copyright © 2010, Juniper Networks, Inc.