Figure 50: Loosening The Captive Screws On The Tx Matrix Plus Seven-Input; Figure 51: Removing The Tx Matrix Plus Seven-Input 420-A Power Supply Input - Juniper TX MATRIX PLUS Hardware Manual

Copyright © 2010, Juniper Networks, Inc.
Figure 50: Loosening the Captive Screws on the TX Matrix Plus
Seven-Input 420–A Power Supply
Captive screw
Grasp the handle of the power supply input tray, and pull it firmly toward you. (see
4.
Figure 51 on page 129).
Slide the input power tray completely out of the power supply.
5.
Repeat the procedure for the input power tray in the other power supply.
6.
Figure 51: Removing the TX Matrix Plus Seven-Input 420–A Power Supply
Input Power Tray
Chapter 11: Installing the TX Matrix Plus Router Using a Mechanical Lift
129