Loading And Committing The Configuration File - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide
Related
Documentation

Loading and Committing the Configuration File

60
NOTE: On an ACX router, you must issue the
command.
alternate
The root file system is backed up to
The root and /config file systems are on the router's CompactFlash card, and the
and file systems are on the router's hard disk or solid-state drive
/altroot /altconfig
(SSD).
NOTE: After you issue the
return to the previous version of the software, because the running copy
and backup copy of the software are identical.
NOTE: To install the Junos OS software package and host software package
on routers with RE-MX-X6, RE-MX-X8, and RE-PTX-X8 Routing Engines, see
VM Host Installation
VM Host Installation
Once the saved configuration file is copied to the router, you load and commit the file:
Start the CLI configuration mode.
1.
user@routername> configure
Entering configuration mode
[edit]
user@host#
Load the file into the current configuration. You should override the existing file.
2.
user@host#
load override /var/tmp/filename
load complete
Commit the file.
3.
user@host# commit
commit complete
Exit the CLI configuration mode.
4.
user@host# exit
user@host>
Back up Junos OS.
5.
request system snapshot slice
, and is backed up to
/altroot /config
command, you cannot
request system snapshot
Copyright © 2017, Juniper Networks, Inc.
.
/altconfig