IP Configuration Command Set
Configuring PIM
12.2.7.13 show ip rpf
Use this command to display the reverse path of an address in the unicast table.
show ip rfp
Syntax Description
None.
Command Type
Router command.
Command Mode
Any router mode.
Command Defaults
None.
Example
This example shows the reverse path information for IP address 80.80.80.252.
Matrix(rw)->Router2>show ip rpf 80.80.80.252
RPF information for: 80.80.80.252
12-68 Matrix DFE-Platinum and Diamond Series Configuration Guide
RPF vlan interface: 10
RPF route/mask:192.168.1.0/255.255.255.0
RPF neighbor:192.168.1.25
Metric preference:110
Metric:10