Honda CR-V 1997 Service Manual page 132

13. Remove the upper radiator hose. heater hose and
water bypass hose.
WATER BYPASS
HOSE
HEATER
HOSE
UPPER
RAOIATOR
HI
, 4. Remove the engine wire harness connectors and
wire harness clamps from the cylinder head and the
intake manifold.
• Four fuel injector connectors
• Engine coolant temperature (ECT) sensor con -
nector
• Radiator fan switch connector
• Coolant temperature gauge sending unit connec-
tor
• Throttle pOSition sensor connector
• Manifold absolute pressure (MAP) sensor con-
nector
• Primary heated oxygen sensor (primary H02S)
connector
• Idle air control (lAC) valve connector
• Distributor connector
15. Remove the spark plug caps and distributor from the
cylinder head.
16. Remove the cruise control actuator (see section 4).
17. Support the engine w ith a jack. then remove the
upper bracket. Make sure to place a cushion
between the oil pan and the jack (see page 6-10).
18. Remove the cylinder head cover.
CYUNDER
COVER
19. Inspect the timing belt Isee page 6-9).
Icont'd)
6-19