Debug Ip Bgp Ipv6 Dampening - Dell Z9500 Command Reference Manual

debug ip bgp ipv6 dampening

View information on IPv6 routes being dampened.
Z9500
Syntax
debug ip bgp ipv6 unicast dampening [in | out]
To disable debugging, use the no debug ip bgp ipv6 unicast dampening
command.
Parameters
in
out
Command EXEC Privilege
Modes
Command
Version
History
9.2(1.0)
8.2.1.0
7.4.1.0
Usage Enter the no debug ip bgp command to remove all configured debug
Information commands for BGP.
Related show ip bgp dampened-paths
Commands
debug ip bgp ipv6 unicast peer-group updates
View information about BGP peer-group updates.
Z9500
Syntax
debug ip bgp ipv6 unicast peer-group peer-group-name updates
[in | out]
To disable debugging, use the no debug ip bgp ipv6 unicast peer-group
peer-group-name updates [in | out] command.
Parameters
peer-group
peer-group-
name
Border Gateway Protocol
(OPTIONAL) Enter the keyword in to view only information
on inbound dampened routes.
(OPTIONAL) Enter the keyword out to view only information
on outbound dampened routes.
Description
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Introduced
– View BGP dampened routes.
Enter the keywords peer-group followed by the name of
the peer-group.
529