Bgp Dampening - Dell Z9500 Command Reference Manual

Hide thumbs Also See for Z9500:
Table of Contents

Advertisement

The autonomous systems configured in this command are visible to the EBGP
neighbors. Each autonomous system is fully meshed and contains a few
connections to other autonomous systems.
After specifying autonomous systems numbers for the BGP confederation, recycle
the peers to update their configuration.
This command automatically restarts the BGP instance for the configuration to
take effect.
Related
bgp confederation identifier
Commands
bgp four-octet-as-support

bgp dampening

Enable BGP route dampening and configure the dampening parameters.
Z9500
Syntax
bgp dampening [half-life reuse suppress max-suppress-time]
[route-map map-name]
To disable route dampening, use the no bgp dampening [half-life reuse
suppress max-suppress-time] [route-map map-name] command.
Parameters
half-life
reuse
suppress
max-suppress-
time
route-map
map-name
374
— configures a confederation ID.
— enables 4-byte support for the BGP process.
(OPTIONAL) Enter the number of minutes after which the
Penalty is decreased. After the router assigns a Penalty of
1024 to a route, the Penalty is decreased by half after the
half-life period expires. The range is from 1 to 45. The default
is 15 minutes.
(OPTIONAL) Enter a number as the reuse value, which is
compared to the flapping route's Penalty value. If the Penalty
value is less than the reuse value, the flapping route is once
again advertised (or no longer suppressed). The range is from
1 to 20000. The default is 750.
(OPTIONAL) Enter a number as the suppress value, which is
compared to the flapping route's Penalty value. If the Penalty
value is greater than the suppress value, the flapping route is
no longer advertised (that is, it is suppressed). The range is
from 1 to 20000. The default is 2000.
(OPTIONAL) Enter the maximum number of minutes a route
can be suppressed. The default is four times the half-life
value. The range is from 1 to 255. The default is 60 minutes.
(OPTIONAL) Enter the keyword route-map then the name
of a configured route map.
Border Gateway Protocol

Advertisement

Table of Contents
loading

Table of Contents