Dell Z9500 Command Reference Manual page 500

Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
7.8.1.0
7.7.1.0
7.6.1.0
Usage
If there is a type or sub-type that is not well-known, it is displayed
Information
as:TTSS:XX:YYYY.
Where TT is type, SS is sub-type displayed in hexadecimal format, XX:YYYY is the
value divided into 2–byte and 4-byte values in decimal format. This format is
consistent with other vendors.
For example, if the extended community has type 0x04, sub-type 0x05, value 0x20
00 00 00 10 00, it displays as:0x0405:8192:4096.
Non-transitive extended communities are marked with an asterisk.
Example
Dell#show ip bgp ipv4 multicast extcommunity-list
BGP routing table entry for 192.168.1.0/24, version 2
Paths: (1 available, table Default-IP-Routing-Table.)
Not advertised to any peer
Received from :
Weight 0,
external
0x0303:254:11223*
Dell#
500
Description
Introduced on the Z9500.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
100.100.1.2 (2.4.0.1) Best
AS_PATH : 200
Next-Hop : 100.100.1.2, Cost : 0
Origin IGP, Metric 4294967295 (Default), LocalPref 100,
Communities :
300:400 500:600
Extended Communities :
RT:1111:4278080 SoO:35:4 SoO:36:50529043 SoO:37:50529044
SoO:38:50529045 SoO:0.0.0.2:33 SoO:506.62106:34
Border Gateway Protocol