Ip Source-Route - Dell Z9500 Command Reference Manual

ip source-route

Enable the system to forward IP packets with source route information in the header.
Z9500
Syntax
ip source-route
To drop packets with source route information, use the no ip route-source
command.
Defaults Enabled.
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
7.6.1.0
7.5.1.0
6.1.1.0
ip unreachables
Enable the generation of internet control message protocol (ICMP) unreachable messages.
Z9500
Syntax
ip unreachables
To disable the generation of ICMP messages, use the no ip unreachables
command.
956
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
IPv4 Routing