Ip Dhcp Snooping Database Renew - Dell Z9500 Command Reference Manual

ip dhcp snooping database renew

Renew the binding table.
Z9500
Syntax
ip dhcp snooping database renew
Defaults none
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.3.1.0
7.8.1.0
ipv6 dhcp snooping database renew
To load the binding entries from the file to DHCPv6 snooping binding database.
Syntax
ipv6 dhcp snooping database renew
Defaults none
Command
•
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
730
EXEC
EXEC Privilege
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series.
Introduced on the C-Series and S-Series.
EXEC Privilege
Description
Introduced on the S4810, S4820T, S6000 and Z-Series.
Dynamic Host Configuration Protocol (DHCP)