Session-Key - Dell Z9500 Command Reference Manual

session-key

Specify the session keys used in the crypto policy entry.
Z9500
Syntax
session-key {inbound | outbound} {ah spi hex-key-string | esp
spi encrypt hex-key-string auth hex-key-string
To delete the session key information from the crypto policy, use the no
session-key {inbound | outbound} {ah | esp} command.
Parameters
name
inbound
outbound
ah
esp
spi
hex-key-string
encrypt
auth
Defaults none
Command CONF-CRYPTO-POLICY
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
9.2(0.0)
Usage
•
Information
•
920
Enter the name for the transform set.
Specify the inbound session key for IPSec.
Specify the outbound session key for IPSec.
Use the AH protocol when you select the AH transform set in
the crypto policy.
Use the ESP protocol when you select the ESP transform set
in the crypto policy.
Enter the security parameter index number.
Enter the session key in hex format (a string of 8, 16, or 20
bytes). For DES algorithms, specify at least 16 bytes per key.
For SHA algorithms, specify at least 20 bytes per key.
Indicates the ESP encryption transform set key string.
Indicates the ESP authentication transform set key string.
Description
Introduced on the Z9500.
Introduced on the Z9000, S4810, and S4820T.
This command is only available in the ipsec-manual model.
The key information entry is associated with the global method for enabling
clear text or encrypted display in the running config.
Internet Protocol Security (IPSec)