Show Config - Dell Z9500 Command Reference Manual

show config

Display the global GVRP configuration.
Z9500
Syntax
show config
Command CONFIGURATION-GVRP
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
Related
gvrp enable
Commands
protocol gvrp
show garp timers
Display the GARP timer settings for sending GARP messages.
Z9500
Syntax
show garp timers
Defaults none
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
800
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on C-Series, E-Series, and S-Series
— enables GVRP on physical interfaces and LAGs.
— accesses the GVRP protocol.
EXEC
EXEC Privilege
GARP VLAN Registration (GVRP)