Dell Z9500 Command Reference Manual page 601

Hide thumbs Also See for Z9500:

Table of Contents

EXEC Privilege

The show output displays information CPU traffic flows for supported IPv6

protocols, including the ingress queue at which the traffic is queued and the CPU

to which protocol traffic is sent with the applied rate limits (configured or default)

in kilobits per second (kbps). The egress port queues on CPUs are abbreviated as:

RP (Route Processor), CP (Control Processor), and LC (line card).

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Dell#show ipv6 protocol-queue-mapping

Control Plane Policing (CoPP)

Introduced on the Z9500.

Introduced on the Z9000.

Introduced on the S4820T.

Introduced on the S4810.