Link-Bundle-Distribution Trigger-Threshold - Dell Z9500 Command Reference Manual

link-bundle-distribution trigger-threshold

Provides a mechanism to set the threshold to trigger when traffic distribution begins being monitored on
an ECMP link bundle.
Z9500
Syntax
link-bundle-distribution trigger-threshold [percent]
To exit from ecmp group mode, use the exit command.
Parameters
percent
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
9.0.0.0
8.3.19.0
8.3.10.0
link-bundle-monitor enable
Provides a mechanism to enable monitoring of traffic distribution on an ECMP link bundle.
Z9500
Syntax
link-bundle-monitor enable
To exit from ECMP group mode, use the exit command.
Command
•
Modes
•
Equal Cost Multi-Path (ECMP)
Indicate the threshold value when traffic distribution starts
being monitored on an ECMP link bundle. The range is from
1 to 90%. The default is 60%.
Description
Introduced on the Z9500.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
ECMP-GROUP
PORT-CHANNEL INTERFACE
749