Show Ip Bgp Paths As-Path - Dell Z9500 Command Reference Manual

show ip bgp paths as-path

View all unique AS-PATHs in the BGP database.
Z9500
Syntax
show ip bgp paths as-path
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.7.1.0
Usage
The following describes the show ip bgp paths as-path command shown in
Information
the following example.
Field
Address
Hash
Refcount
AS-Path
Example
Dell#show ip bgp paths as-path
Total 13 AS-Paths
Address
0x1ea3c1ec
0x1ea3c25c
0x1ea3c1b4
0x1ea3c304
0x1ea3c10c
0x1ea3c144
476
EXEC
EXEC Privilege
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Description
Displays the internal address where the path attribute is
stored.
Displays the hash bucket where the path attribute is stored.
Displays the number of BGP routes using these AS-Paths.
Displays the AS paths for this route, with the origin code for
the route listed last. Numbers listed between braces {} are
AS_SET information.
Hash Refcount AS-Path
251
251
507
507
763
763
1 42
1 22
1 13
1 33
1 {92 93}
1 {102 103}
Border Gateway Protocol