Address Family Ipv6 Unicast - Dell Z9500 Command Reference Manual

Defaults Not configured.
Command ROUTER BGP
Modes
Command
Version
History
9.2(1.0)
6.5.1.0
Usage Enter ipv6unicast to enter the BGP for IPv6 mode (CONF-ROUTER_BGPv6_AF).
Information

address family ipv6 unicast

This command changes the context to subsequent address family identifier (SAFI).
Z9500
Syntax
address family ipv6 unicast
To remove SAFI context, use the no address family ipv6 unicast
command.
Parameters
ipv6
unicast
Defaults IPv6 Unicast
Command ROUTER BGPV6-ADDRESS FAMILY
Modes
Command
Version
History
9.2(1.0)
7.4.1.0
Usage All subsequent commands apply to this address family after you execute this
Information command. You can exit from this AFI/SAFI to the IPv6 Unicast (the default) family
by entering exit and returning to the Router BGP context.
504
Description
Introduced on the Z9500.
Introduced
Enter the keyword ipv6 to specify the address family as
IPv6.
Enter the keyword unicast to specify multicast as SAFI.
Description
Introduced on the Z9500.
Introduced
Border Gateway Protocol