Dot1X Port-Control - Dell Z9500 Command Reference Manual

Hide thumbs Also See for Z9500:

Table of Contents

128 hosts can be authenticated on a single authenticator port.

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

dot1x host-mode

dot1x port-control

Enable port control on an interface.

dot1x port-control {force-authorized | auto | force-

unauthorized}

unauthorized

Enter the number of supplicants that can be authenticated

on a single port in Multi-Auth mode. The range is from 1 to

128. The default is 128.

Introduced on the Z9500.

Introduced on the S4820T.

Introduced on the S4810.

Introduced on the Z9000.

Introduced on the C-Series and S-Series.

Enter the keywords force-authorized to forcibly

authorize a port.

Enter the keyword auto to authorize a port based on the

802.1X operation result.

Enter the keywords force-unauthorized to forcibly

deauthorize a port.