Ipv6 Dhcp Snooping Database Write-Delay - Dell Z9500 Command Reference Manual

Parameters
minutes
Defaults none
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.3.1.0
7.8.1.0

ipv6 dhcp snooping database write-delay

To set time interval for storing the snooping binding entries in a file.
Syntax
[no] ipv6 dhcp snooping database write-delay value
To disable the storing of snooping binding entries in a file, use the no ipv6 dhcp
snooping write-delay command.
Parameters
value
Defaults none
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
Dynamic Host Configuration Protocol (DHCP)
The range is from 5 to 21600.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series.
Introduced on the C-Series and S-Series.
The range is from 5 to 21600. The value of the minutes range
is from 5 min. to 15 days.
Description
Introduced on the S4810, S4820T, S6000 and Z-Series.
729