Banner Motd - Dell Z9500 Command Reference Manual

13d21h10m: %RPM0-P:CP %SEC-5-LOGIN_SUCCESS: Login successful
for user on line console
This is the banner
Dell>
Related

banner motd

Commands
banner motd
Set a message of the day (MOTD) banner.
Z9500
Syntax
banner motd c line c
Parameters
c
line
Defaults No banner is configured.
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.12.0
8.3.11.1
8.1.1.0
7.6.1.0
7.5.1.0
E-Series
Usage After entering the banner login command, type one or more spaces and a
Information delineator character. Enter the banner text then the second delineator character.
When the user is connected to the router, if a message of the day banner is
Control and Monitoring
— sets a Message of the Day banner.
Enter a delineator character to specify the limits of the text
banner. The delineator is a percent character (%).
Enter a text string for your MOTD banner the message with
your delineator. The delineator is a percent character (%).
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Original command
91