Deny - Dell Z9500 Command Reference Manual

Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
7.8.1.0
7.6.1.0
7.5.1.0
6.2.1.1
Related ip prefix-list
Commands

deny

To drop packets meeting the criteria specified, configure a filter.
Z9500
Syntax
deny ip-prefix [ge min-prefix-length] [le max-prefix-length]
To delete a drop filter, use the no deny ip-prefix command.
Parameters
ip-prefix
ge min-prefix-
length
le max-prefix-
length
Defaults Not configured.
Command PREFIX-LIST
Modes
Access Control Lists (ACL)
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Increase the name string to accept up to 140 characters.
Prior to 7.8.1.0, names were up to 16 characters long.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— configures a prefix list.
Specify an IP prefix in the network/length format. For
example, 35.0.0.0/ 8 means match the first 8 bits of address
35.0.0.0.
(OPTIONAL) Enter the keyword ge and then enter the
minimum prefix length, which is a number from zero (0) to
32.
(OPTIONAL) Enter the keyword le and then enter the
maximum prefix length, which is a number from zero (0) to
32.
297