Obtaining Help - Dell Z9500 Command Reference Manual

User "admin" on line vty0 ( 123.12.1.123 )
User "admin" on line vty1 ( 123.12.1.123 )
User "Irene" on line vty3 ( 123.12.1.321 )
Dell#conf
When another user enters CONFIGURATION mode, Dell Networking OS sends a message similar to the
following:
% Warning: User "admin" on line vty2 "172.16.1.210" is in configuration
In this case, the user is "admin" on vty2.

Obtaining Help

As soon as you are in a command mode there are several ways to access help.
To obtain a list Type a ? at the prompt or after a keyword. There must always be a space before
of keywords at
the ?.
any command
mode:
To obtain a list Type help at the prompt.
of keywords
with a brief
functional
description:
To obtain a list Type a keyword and then type a space and a ?.
of available
options:
To obtain a list Type a partial keyword and then type a ?.
of partial
keywords using
a partial
keyword:
Example
The following is an example of typing ip ? at the prompt:
Dell(conf)#ip ?
access-list
as-path
community-list
domain-list
name
domain-lookup
translation
domain-name
fib
ftp
host
max-frag-count
assembly
multicast-routing
name-server
pim Protocol
prefix-list
48
Named access-list
BGP autonomous system path filter
Add a community list entry
Domain name to complete unqualified host
Enable IP Domain Name System hostname
Define the default domain name
FIB configuration commands
FTP configuration commands
Add an entry to the ip hostname table
Max. fragmented packets allowed in IP re-
Enable IP multicast forwarding
Specify address of name server to use
Independent Multicast
Build a prefix list
CLI Basics