Ip Prefix-List - Dell Z9500 Command Reference Manual

Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
7.6.1.0
7.5.1.0
6.1.1.0
Usage
Sequence numbers for this filter are automatically assigned starting at sequence
Information
number 5.
If you do not use the ge or le options, only packets with an exact match to the
prefix are filtered.
Related
permit
Commands
seq

ip prefix-list

Enter the PREFIX-LIST mode and configure a prefix list.
Z9500
Syntax
ip prefix-list prefix-name
To delete a prefix list, use the no ip prefix-list prefix-name command.
Parameters
prefix-name
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
298
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— configures a filter to pass packets.
— configures a drop or permit filter with a specified sequence number.
Enter a string up to 16 characters long as the name of the
prefix list, up to 140 characters long.
Access Control Lists (ACL)