Parameters
master
transit
Defaults
Mode None
Command
CONFIGURATION (conf-frrp)
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0
7.4.1.0
protocol frrp
Enter the Resilient Ring Protocol and designate a ring identification.
Syntax
protocol frrp {ring-id}
To exit the ring protocol, use the no protocol frrp {ring-id} command.
Parameters
ring-id
Defaults
none
Command
CONFIGURATION
Modes
Force10 Resilient Ring Protocol (FRRP)
Enter the keyword master to set the Ring node to Master
mode.
Enter the keywordtransit to set the Ring node to Transit
mode.
Description
Introduced on the S6000–ON.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series.
Introduced.
Enter the ring identification number. The range is from 1 to
255.
787