Dell Z9500 Command Reference Manual page 664

unit unit-num
party-bus
rp
sfm sfm-unit-
num
Defaults none
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.0
664
• cpu sata-interface statistics: Clears sata-
interface error counter statistics.
Enter the unit unit-num parameters with a command
option to clear hardware statistics for a specified NPU. The
range of NPU numbers is 0 to 3. The command options are:
• counters: Clears the packets counters.
Enter the keyword party-bus with a command option to
clear hardware statistics for the party bus that links Z9500
CPUs. The command options are:
• port port-num statistics: Clears statistics on a
specified party-bus internal port.
• port all: Clear statistics on all party-bus internal ports.
Enter the keyword rp with a command option to clear
hardware statistics for the Route Processor. The command
options are:
• cpu data-plane statistics: Clears data-plane
statistics, including the HiGig port statistics with input/
output counters.
• cpu i2c statistics: Clears active i2c-address
statistics.
• cpu sata-interface statistics: Clears sata-
interface error counter statistics.
Enter the keyword sfm with an Switch Fabric Module (SFM)
unit number and a command option to clear hardware
statistics from the specified SFM on the Z9500. The range of
SFM unit numbers is from 0 to 5. The command options are:
• counters: Clears the traffic counters.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Debugging and Diagnostics