Show Running-Config Bgp - Dell Z9500 Command Reference Manual

2 BGP path attribute entrie(s) using 144 bytes of memory
1 BGP AS-PATH entrie(s) using 10 bytes of memory
2 neighbor(s) using 16384 bytes of memory
Neighbor
InQ
172.16.0.2
0
192.168.10.2
0
Dell#

show running-config bgp

To display the current BGP configuration, use this feature.
Z9500
Syntax
show running-config bgp
Defaults none
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.7.1.0
7.6.1.0
timers bgp
Adjust the BGP Keep Alive and Hold Time timers.
Z9500
Syntax
timers bgp keepalive holdtime
To return to the default, use the no timers bgp command.
Border Gateway Protocol
AS
OutQ Up/Down State/Pfx
200
0 00:05:34 2
100
0 00:00:00 (shut)
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
MsgRcvd MsgSent
10 8
0 22
TblVer
0
0
485