Debug Ip Bgp - Dell Z9500 Command Reference Manual

Version
9.7(0.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.7.1.0

debug ip bgp

Display all information on BGP, including BGP events, keepalives, notifications, and updates.
Z9500
Syntax
debug ip bgp [ vrf vrf-name | A.B.C.D | X:X:X:X::X | peer-group
peer-group-name] [in | out]
To disable all BGP debugging, use the no debug ip bgp command.
Parameters
vrf vrf-name
A.B.C.D
X:X:X:X::X
peer-group
peer-group-
name
in
out
A.B.C.D
X:X:X:X::X
dampening
events
ipv4
394
Description
Added the ipv4 multicast and ipv6 unicast parameters.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Enter the keyword vrf and then the name of the VRF to
debug BGP information corresponding to that VRF.
NOTE: Use this attribute to debug BGP protocol
operations corresponding to either a default or non-
default VRF.
Enter the IPv4 address of the neighbor in dotted decimal
format.
(OPTIONAL) Enter an IPv6 address.
Enter the keywords peer-group then the name of the peer
group to debug.
(OPTIONAL) Enter the keyword in to view only information
on inbound BGP routes.
(OPTIONAL) Enter the keyword out to view only information
on outbound BGP routes.
Enter the IP address of peer in the A.B.C.D format.
Enter the IPv6 IP address of peer in the X:X:X:X::X format.
Enter the keyword dampening to view BGP dampening.
Enter the keyword events to view BGP protocol events.
Enter the ipv4 IP address to view the IPV4 route information.
Border Gateway Protocol