Neighbor Local-As - Dell Z9500 Command Reference Manual

Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.7.1.0
Usage This feature advertises to BGP neighbors through a capability advertisement. In
Information Receiver Only mode, BGP saves the advertised routes of peers that support this
capability when they restart.

neighbor local-as

To accept external routes from neighbors with a local AS number in the AS number path, configure
Internal BGP (IBGP) routers.
Z9500
Syntax
neighbor {ip-address | peer-group-name} local-as as-number [no-
prepend]
To return to the default value, use the no neighbor {ip-address | peer-
group-name} local-as command.
Parameters
ip-address
peer-group-
name
as-number
no prepend
Defaults Not configured.
Command ROUTER BGP
Modes
Border Gateway Protocol
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Enter the IP address of the neighbor in dotted decimal
format.
Enter the name of the peer group to set the advertisement
interval for all routers in the peer group.
Enter the AS number to reset all neighbors belonging to that
AS. The range is from 0 to 65535 (2 byte), from 1 to
4294967295 (4 byte) or from 0.1 to 65535.65535 (dotted
format).
Specifies that local AS values do not prepend to
announcements from the neighbor.
419