Clear Alarms - Dell Z9500 Command Reference Manual

Usage Enables periodic audits of the software and hardware copies of the IPv4 forwarding
Information table.

clear alarms

Clear alarms on the system.
Z9500
Syntax
clear alarms
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.12.0
8.3.11.1
8.1.1.0
7.6.1.0
7.5.1.0
E-Series
Usage This command clears alarms that are no longer active. If an alarm situation is still
Information active, it is seen in the system output.
Control and Monitoring
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Original command.
97