Permit Bandwidth - Dell Z9500 Command Reference Manual

permit bandwidth

Enables you to specify link band width extended-community attribute as the matching criteria to permit
incoming or outgoing traffic.
Syntax
permit bandwidth
To disable this setting, enter the no permit bandwidth command.
Parameters
bandwidth
Defaults N/A
Command EXTENDED COMMUNITY LIST
Modes
Command
Version
History
9.7(0.0)
Related deny bandwidth
Commands criteria to deny incoming or outgoing traffic..
redistribute
Redistribute routes into BGP.
Z9500
Syntax
redistribute {connected | static} [route-map map-name]
To disable redistribution, use the no redistribution {connected | static}
command.
Parameters
connected
static
route-map
map-name
Border Gateway Protocol
Enter the keyword bandwidth to specify extended-
community attribute as the matching criteria for permitting
traffic. The range is from 0 to 102400.
Description
Introduced on the S-Series.
– link band width extended-community attribute as the matching
Enter the keyword connected to redistribute routes from
physically connected interfaces.
Enter the keyword static to redistribute manually
configured routes.
These routes are treated as incomplete routes.
(OPTIONAL) Enter the keyword route-map then the name
of an established route map.
Only the following ROUTE-MAP mode commands are
supported:
441