Debug Ip Bgp Dampening - Dell Z9500 Command Reference Manual

Dell Networking Platform Support
OS Version
7.8.1.0, MBGP for S-Series
IPv4 Multicast Only
8.2.1.0, MBGP E-Series ExaScale

debug ip bgp dampening

View information on routes being dampened.
Z9500
Syntax
debug ip bgp [vrf vrf-name] [ipv4 {unicast | multicast} | ipv6
unicast] dampening
To disable debugging, use the no debug ip bgp dampening command.
Parameters
vrf vrf-name
ipv4 multicast
ipv4 unicast
ipv6 unicast
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
b
Version
9.7(0.0)
9.0.2.0
8.3.19.0
8.3.11.1
Border Gateway Protocol
Enter the keyword vrf followed by the name of the VRF to
view information on dampened routes corresponding to that
VRF.
(OPTIONAL) Enter the keyword ipv4 followed by the
keyword multicast to view dampened-route information
related only to ipv4 multicast routes.
(OPTIONAL) Enter the keyword ipv4 followed by the
keyword multicast to view dampened-route information
related only to ipv4 unicast routes.
(OPTIONAL) Enter the keyword ipv4 followed by the
keyword unicast to view dampened-route information
related only to ipv6 unicast routes.
Description
Introduced on the S6000–ON.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
487