Dell Z9500 Command Reference Manual page 463

Hide thumbs Also See for Z9500:

Table of Contents

ipv6 unicast

as-path-name

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

The following describes the show ip bgp filter-list hello command

shown in the following example.

Border Gateway Protocol

(OPTIONAL) Enter the keyword ipv6 followed by the

keyword unicast to view information related only to ipv6

unicast routes.

Enter an AS-PATH access list name. The range is 140

EXEC Privilege

Added the ipv4 multicast and ipv6 unicast parameters.

Added support for VRF.

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

Introduced on the S-Series.

Introduced on the C-Series.

Lists the path sources shown to the right of the last AS

number in the Path column:

i = internal route entry

a = aggregate route entry

c = external confederation route entry

n = network route entry

r = redistributed route entry

Displays the next hop address of the BGP router. If 0.0.0.0 is

listed in this column, then local routes exist in the routing

Displays the BGP route's metric, if assigned.