Description - Dell Z9500 Command Reference Manual

description

Enter a description of the BGP routing protocol.
Z9500
Syntax
description {description}
To remove the description, use the no description {description}
command.
Parameters
description
Defaults none
Command ROUTER BGP
Modes
Command
Version
History
9.2(1.0)
8.2.1.0
7.4.1.0
Related router bgp
Commands
distance bgp
Configure three administrative distances for routes.
Z9500
Syntax
distance bgp external-distance internal-distance local-distance
To return to default values, use the no distance bgp command.
Parameters
external-
distance
internal-
distance
local-distance
534
Enter a description to identify the BGP protocol (80
characters maximum).
Description
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Introduced
– Enter ROUTER mode on the switch.
Enter a number to assign to routes learned from a neighbor
external to the AS. The range is 1 to 255. The default is 20.
Enter a number to assign to routes learned from a router
within the AS. The range is 1 to 255. The default is 200.
Enter a number to assign to routes learned from networks
listed in the network command. The range is 1 to 255. The
default is 200.
Border Gateway Protocol