Dell Z9500 Command Reference Manual page 257

Hide thumbs Also See for Z9500:

Table of Contents

Not configured.

CONFIGURATION-EXTENDED-ACCESS-LIST

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Use the order option only when you use policy-based QoS on the switch. For

more information, refer to the Quality of Service chapter of the Z9500

Configuration Guide.

When you use the log option, the CP processor logs detail the packets that match.

Depending on how many packets match the log entry and at what rate, the CP

may become busy as it has to log these packets' details.

Access Control Lists (ACL)

(OPTIONAL) Enter the keyword interval followed by the

time period in minutes at which ACL logs must be generated.

The threshold range is from 1 to 10 minutes.

(OPTIONAL) Enter the keyword monitor when the rule is

describing the traffic that you want to monitor and the ACL

in which you are creating the rule is applied to the monitored

interface. For more information, refer to the "Flow-based

Monitoring" section in the Port Monitoring chapter of the

Dell Networking OS Configuration Guide.

Introduced on the Z9500.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

Added the keyword dscp.

Allows ACL control of fragmented packets for IP (Layer 3)

Introduced on the E-Series ExaScale.

Introduced on the S-Series.

Introduced on the C-Series.

Added support for non-contiguous mask and added the

monitor option. .

Expanded to include the optional QoS order priority for the