Dell Z9500 Command Reference Manual page 301

Hide thumbs Also See for Z9500:

Table of Contents

ip-prefix /nn

ge min-prefix-

le max-prefix-

Not configured.

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

If you do not use the ge or le options, only packets with an exact match to the

prefix are filtered.

Access Control Lists (ACL)

(OPTIONAL) Specify an IP prefix in the network/length

format. For example, 35.0.0.0/8 means match the first 8 bits

of address 35.0.0.0.

(OPTIONAL) Enter the keyword ge and then enter the

minimum prefix length, which is a number from zero (0) to

(OPTIONAL) Enter the keyword le and then enter the

maximum prefix length, which is a number from zero (0) to

Enter the keyword bitmask then enter a bit mask number in

dotted decimal format.

Introduced on the Z9500.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

Introduced on the E-Series ExaScale.

Introduced on the S-Series.

Introduced on the C-Series.

Added the bit mask option.

— configures a filter to drop packets.

— configures a filter to pass packets.