Dell Z9500 Command Reference Manual page 980

Version
7.9.1.0
7.6.1.0
7.5.1.0
6.1.1.0
Usage The following describes the show ip route all command in the following
Information
example.
Field
(undefined)
Destination
Gateway
Dist/Metric
Last Change
Example
Dell#show ip route all
Codes:C- connected, S - static, R - RIP
Locally Originated
980
Description
Introduced VRF on the E-Series.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Description
Identifies the type of route:
• C = connected
• S = static
• R = RIP
• B = BGP
• IN = internal BGP
• EX = external BGP
• LO = Locally Originated
• O = OSPF
• IA = OSPF inter area
• N1 = OSPF NSSA external type 1
• N2 = OSPF NSSA external type 2
• E1 = OSPF external type 1
• E2 = OSPF external type 2
• i = IS-IS
• L1 = IS-IS level-1
• L2 = IS-IS level-2
• IA = IS-IS inter-area
• * = candidate default
• > = non-active route
• + = summary routes
Identifies the route's destination IP address
Identifies whether the route is directly connected and on
which interface the route is configured.
Identifies if the route has a specified distance or metric.
Identifies when the route was last changed or configured.
B- BGP, IN - internal BGP, EX - external BGP, LO -
O- OSPF, IA - OSPF inter area N1 - OSPF NSSA external
IPv4 Routing