Show Control-Traffic - Dell Z9500 Command Reference Manual

Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
9.2(0.0)
8.3.19.0
8.3.11.5
8.3.11.4
8.3.11.1
8.3.7.0
7.7.1.0
Usage Use the remote-exec command to remotely execute a command on the Route
Information
Processor and line-card (LP) processor from the Control Processor.
Related
show hardware
Commands

show control-traffic

Display information about the control traffic transmitted on a Z9500 CPU: Route Processor, Control
Processor, or line card.
Syntax
show control—traffic {cp | rp | linecard slot-id} counters
Parameters
cp
rp
linecard slot-id
Defaults None.
Debugging and Diagnostics
EXEC
EXEC Privilege
Description
Introduced on the Z9500.
Modified the drops keyword range, unit keyword range
and added the buffer and cpu management
statistics options.
Introduced on the S4820T.
Added i2c statistics and sata-interfaces statistics.
Added user port information.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
— displays information on hardware components.
Enter the keyword cp to display control-traffic information
from the Control Processor CPU.
Enter the keyword rp to display control-traffic information
from the Route Processor CPU.
Enter the linecard slot-id parameters to display
control-traffic information from the specified line-card
processor. The range of Z9500 slot IDs is from 0 to 2.
667