Login Concurrent-Session - Dell Z9500 Command Reference Manual

Defaults Not configured
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.12.0
8.3.11.1
8.1.1.0
7.6.1.0
7.5.1.0
E-Series
Usage You cannot delete a terminal connection.
Information
Related
access-class
Commands
IP access control list (ACL).
password

login concurrent-session

Configures the limit of concurrent sessions for all users on console and virtual terminal lines.
Syntax
login concurrent-session {limit number-of-sessions | clear—line
enable}
no login concurrent-session {limit number-of-sessions | clear—
line enable}
Parameters
limit number-
of-sessions
Control and Monitoring
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Original command
— restricts the incoming connections to a particular IP address in an
— specifies a password for users on terminal lines.
Sets the number of concurrent sessions that any user can
have on console and virtual terminal lines. The range is from
1 to 12 (10 VTY lines, one console, and one AUX line).
121