Bgp Asnotation - Dell Z9500 Command Reference Manual

Version
8.2.1.0
7.7.1.0
Usage
Any update without a MED attribute is the least preferred route.
Information
If you enable this command, use the clear ip bgp * command to recompute
the best path.

bgp asnotation

Allows you to implement a method for AS number representation in the command line interface (CLI).
Z9500
Syntax
bgp asnotation [asplain | asdot+ | asdot]
To disable a dot or dot+ representation and return to ASPLAIN, enter the no bgp
asnotation command.
Defaults asplain
Command ROUTER BGP
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.3.1.0
8.2.1.0
Usage
Before enabling this feature, enable the enable bgp four-octet-as-
Information
supportcommand. If you disable the four-octect-support command after
using dot or dot+ format, the AS numbers revert to asplain text.
When you apply an asnotation, it is reflected in the running-configuration. If you
change the notation type, the running-config updates dynamically and the new
notation shows.
Border Gateway Protocol
Description
Introduced command.
Introduced on the C-Series.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced the dynamic application of AS notation changes
Introduced
365