Show Ip Dhcp Conflict - Dell Z9500 Command Reference Manual

show ip dhcp conflict

Display the address conflict log.
Z9500
Syntax
show ip dhcp conflict address
Parameters
address
Defaults none
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0
show ip dhcp lease
Display lease information about the dynamic IP address currently assigned to a DHCP client interface.
Z9500
Syntax
show ip dhcp dhcp lease [interface type slot/port]
Parameters
interface type
slot/port
Defaults none
720
Display a particular conflict log entry.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Enter the keyword interface with the interface type and
slot/port information to display DHCP lease information for a
specified interface. The valid interface types are:
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE.
Dynamic Host Configuration Protocol (DHCP)