Isis Password - Dell Z9500 Command Reference Manual

Version
8.3.11.1

isis password

Configure an authentication password for an interface.
Z9500
Syntax
isis password [hmac-md5] password [level-1 | level-2]
To delete a password, use the no isis password [password] [level-1 |
level-2] command.
Parameters
encryption-
type
hmac-md5
password
level-1
level-2
Defaults No default password. level-1 (if not otherwise specified).
Command INTERFACE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.5(0.1)
9.0.2.0
8.3.19.0
8.3.12.0
1092
Description
Introduced on the Z9000.
(OPTIONAL) Enter 7 to encrypt the password using DES.
(OPTIONAL) Enter the keywords hmac-md5 to encrypt the
password using MD5.
Assign the interface authentication password.
(OPTIONAL) Independently configures the authentication
password for Level 1. The router acts as a station router for
Level 1 routing. This setting is the default.
(OPTIONAL) Independently configures the authentication
password for Level 2. The router acts as an area router for
Level 2 routing.
Description
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Intermediate System to Intermediate System (IS-IS)