Tagged - Dell Z9500 Command Reference Manual

10
unassigned
20
2.3.3.3/24
30
2.1.1.1/24
Example
Dellconf)#interface vlan 20
(Name)
Dell(conf-if-vl-20)#name test
Dell(conf-if-vl-20)#do show vlan name test
Codes: * - Default VLAN, G - GVRP VLANs, R - Remote Port
Mirroring VLANs, P - Primary, C - Community, I - Isolated
Q: U - Untagged, T - Tagged
untagged, V - VLT tagged
0/140,Te 1/80)
1/81)
Related
interface vlan
Commands

tagged

Add a Layer 2 interface to a VLAN as a tagged interface.
Z9500
Syntax
tagged interface
To remove a tagged interface from a VLAN, use the no tagged interface
command.
Parameters
interface
Defaults All interfaces in Layer 2 mode are untagged.
1160
O - Openflow
x - Dot1x untagged, X - Dot1x tagged
o - OpenFlow untagged, O - OpenFlow tagged
G - GVRP tagged, M - Vlan-stack
i - Internal untagged, I - Internal tagged, v - VLT
NUM Status
20 Active
— configures a VLAN.
Enter the following keywords and slot/port or number
information:
• For a Port Channel interface, enter the keywords port-
channel then a number. The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
0
0
0
Description
1800
1800
1800
Q Ports
T Po10(Te
T Po20(Te
T Fo 2/0
Layer 2