Debug Isis Graceful-Restart - Dell Z9500 Command Reference Manual

Hide thumbs Also See for Z9500:

Table of Contents

EXEC Privilege

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

debug isis graceful-restart

Enables debugging information on IS-IS; this information contains graceful-restart details that are tied to

a VRF. It displays GR hello, internal state, and event debugs.

debug isis [vrf vrf-name] graceful-retart [all | events | hello

To turn off debugging, use the no debug isis [vrf vrf-name] spf-

triggers command.

vrf vrf-name

(OPTIONAL) Identifies the interface type slot/port as one of

the following:

For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port information.

For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE then the slot/port information.

For a Port Channel interface, enter the keywords port-

channel then a number. The range is from 1 to 128.

For a VLAN, enter the keyword vlan then a number from

Introduced on the Z9500.

Introduced on the Z9000.

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the S4810.

(OPTIONAL) Enter the keyword vrf followed by the name of

the VRF to enable debugging information on IS-IS

corresponding to that VRF. This information contains

Intermediate System to Intermediate System (IS-IS)