Util:) Fast - Comtech EF Data CDM-710 Installation And Operation Manual

CDM-710/L Broadcast Satellite Modem
Front Panel Operation

7.2.6.6 (UTIL:) FAST

Comtech EF Data's FAST (Fully Accessible System Topology) options are available
through the basic platform unit. The FAST system permits the purchase and
installation of options through special authorization codes, entered remotely or
through the front panel. FAST allows immediate implementation of available
options upon acceptance of the FAST Access Code.
Use the   arrow keys to select Cnfg or View. Press ENTER.
(UTIL:) FAST  Cnfg (Configuration)
Use the arrow keys to select Edit Code or Demo Mode. Press ENTER.
 
(UTIL:) FAST  Cnfg  Edit Code
ENTER the code carefully on the bottom line: Use the
each digit, and then use the
Once you correctly compose the 20-digit FAST Code, press ENTER. The modem
responds with "Configured Successfully" if the unit accepts the code and
activates the FAST option.
However, if you enter an invalid code, the modem rejects the entry and displays
themessage "FAST Code Rejected!" The unit prompts you to press ENTER or
CLEAR. You must then repeat the FAST access code entry procedure. Should the
code entry error persist, contact Comtech EF Data Product Support for further
assistance.
FAST: Cnfg View
MainBoard S/N:
FAST Configuration
Edit Code Demo Mode
Edit 20 digit FAST Code:
00000000000000000000 ENT
arrow keys to edit that digit.

7–73
0123456789
arrow keys to move to
 
MN/CDM710.IOM
Revision 12