Supported Classes And Associations; Fc Hba Profile; Prerequisites; Data Model - Brocade Communications Systems StoreFabric SN6500B Developer's Manual
Brocade network advisor smi agent developer's guide v12.0.0 (53-1002701-01, march 2013)
Hide thumbs
Also See for StoreFabric SN6500B:
- User manual (1505 pages) ,
- Command reference manual (1168 pages) ,
- Reference (934 pages)
Table of Contents
Advertisement
3
FC HBA profile
•
•
•
•
•
Supported classes and associations
The supported classes and associations are shown in
FC HBA profile
The Fibre Channel Host Bus Adapter (FC HBA) profile is similar to the FDMI subprofile. As with
FDMI, this model also supports all HBA configurations such as single node-single port HBA,
single-node dual-port HBA, and dual-node dual-port HBA.
Prerequisites
Only the HBAs discovered in Brocade Network Advisor are exposed through the FC HBA profile.
Data model
Figure 25
50
The Brocade_CPModule.ModuleNumber shows the slot number of the CP blade.
The Brocade_CPModule is associated to the Brocade_PhysicalComputerSystem using
Brocade_CPInPCS:CIM_SystemDevice. This association shows the containment relationship on
the logical side.
Each Brocade_CPModule is associated to a Brocade_CPMgmtAccessPoint, which shows the IP
address of the CP.
Each Brocade_CPModule is associated to a Brocade_CPSoftwareIdentity instance, which
shows the firmware running on the CP.
The Brocade_CPModule instances is aggregated to the Brocade_PhysicalComputerSystem,
which is the parent system.
shows the data model of the FC HBA profile.
Figure
24.
Brocade Network Advisor SMI Agent Developer's Guide
53-1002701-01
Advertisement
Table of Contents
