Restoring A Switch Configuration For A Selected Device - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

Restoring a switch configuration for a selected device

The Restore Switch Configuration dialog box enables you to download a previously saved switch
configuration to a selected device.
To restore a switch configuration, complete the following steps.
1. Right-click a device in the Product List or the Connectivity Map, and select Configuration >
2. Select the switch configuration you want to download from the Saved Switch Configurations
3. Click OK.
DCFM Enterprise User Manual
53-1001775-01
Restore.
The Restore Switch Configuration dialog box displays
FIGURE 82 Restore Switch Configuration dialog box
table.
The configuration is downloaded to the device. If necessary, the restoration process prompts
you to disable and reboot the device before the configuration begins. This lets you determine
whether the configuration backup should be performed immediately or at a later time.
When you restore a switch configuration on a Virtual Fabrics-configured chassis, the
configuration data for the logical switches is downloaded to the switch as configured in the file.
When you restore a switch configuration on a logical switch, only the selected logical switch
configuration data is downloaded to the switch.
Restoring a switch configuration for a selected device
(Figure 81).
8
185